Skip to main content

MEO Class 1

  • You are joining as CE. How will you come to know ISM is effectively implemented.
  • Assignment of loadline.
  • When class notation is given. What all class notation do you have.
  • what are green house gases?
  • vetting and port state control difference.
  • In the way to engine room collision has taken action as chief engineer.
  • As CE what repair will you suggest to carry out in Drydock
  • In a voyage sudden increase in fuel consumption reason.how will you find the fault.
  • What is CLC ? What is the definition of persistent oil.
  • What is the SCOPIC clause?
  • Assignment of loadline.
  • What is CIC by PSC?
  • How will you implement ism on chief engineer on a new ship
  • How will you prepare for seq survey
  • How will you prepare loadline survey
  • Aux eng crankshaft broken how will you prepare the report for H and M surveyor
  • LO consumption high ..what checks
  • Drydock preparation
  • You have fuel which is not compliant , and you have to leave port and no fuel is available , what will you do as a chief engineer
  • During grade change from propane to ammonia, what will you check as CE 
  • If icing in cargo tank what will be your action
  • What are the difficulties faced with low sulphur fuel, what you do
  • What is the steel that is used for construction(  for LPG tankers)
  • LL survey, how u will prepare ship as Ce?
  • Bunker dispute how u will handle as CE? 
  • bunker bimco clause etc.
  • Collision in E/R how you will deal as Ce.
  • How to asses ME is fit or not, actually he wanted ur practical approach as CE 
  • P & I? What all risk cover?
  • scopic, article13,14 in detail
  • Drydocking as Ce what all document u prepared for dock?
  • OWS is not working just before two day of port arrival , what is ur action Ce?
  • Main engine TC got a hole in exhaust side , how u deal with?
  • Iopp survey is due. Preparations as CE
  • SEQ survey is due. Preparations as CE.
  • ESP
  • Condition Monitoring
  • Intelligent Engine
  • Vessel on a short run and unable to maintain crew rest hours. 
  • Company has taken over a vessel. Now the company is putting pressure to immediately sail out  for loading. Minimum checks as per CE.
  • U join a new yard delivery ship, how will you implement isps code?
  • how u ll prepared ur ship as Ce for upcoming LL survey?
  • Grounding in way of engine room your action as chief engineer?
  • regarding how you know about damage?
  • Esp? What is it? Why it came? Since I done only container ships 
  • You departing port with non-complaint fuel for next arrival port, your actions as CE. 
  • You take over 2nd hand ship and superintendent telling you to sail on short notice, what all minimum checks you carried out as CE?
  • Marpol Annex 6 survey is coming up, how you prepare your ship for the survey as CE?
  • 8.5psc detainable deficiency, 5 ism related detainable deficiency.
  • How you proceed for Nc? Who will close it? 
  • Hague Visby rules? if ship departs from country A which comply with rules and arrive on country B which not comply with HV rules then is it applicable for claim @port b.
  • Your vessel going for recycling your preparation as CE? Convention for it? India ratified it or not? 

Labels:

Comments

Post a Comment

Popular posts from this blog

Load Line & Why it is Important

Merchant ships have a marking on their hull know as the Plimsoll line or the Plimsoll mark, which indicates the limit until which ships can be loaded with enough cargo, internationally, the Plimsoll line on a ship is officially referred to as the international load line. Every type of ship has a different level of floating and the Plimsoll line on a ship generally varies from one vessel to another.  All vessels of 24 meters and more are required to have this Load line marking at the centre position of the length of summer load water line. There are two types of Load line markings:- Standard Load Line marking – This is applicable to all types of vessels. Timber Load Line Markings – This is applicable to vessels carrying timber cargo. These marks shall be punched on the surface of the hull making it visible even if the ship side paint fades out. The marks shall again be painted with white or yellow colour on a dark background/black on a light background.  The comp
9 comments
Read more

Difference Between A, B & C-Class Divisions?

IMO Symbol A Class Division  IMO Symbol B Class Division  SOLAS has tables for structural fire protection requirement of bulkheads and decks. The requirements depend on the spaces in question and are different for passenger ships and cargo ships. The Administration has required a test of a prototype bulkhead or deck in accordance with the Fire Test Procedures Code to ensure that it meets the above requirements for integrity and temperature rise. Types of Divisions: "A" Class "B" Class "C" Class "A" Class: "A" class divisions are those divisions formed by bulkheads and decks which comply with the following criteria: They are constructed of steel or equivalent material They are suitably stiffened They are constructed as to be capable of preventing the passage of smoke and flame to the end of the one-hour standard fire test. they are insulated with approved non-combustible materials such that the average tempera
14 comments
Read more

Gravity Disc

Oils containing water can only be de-watered in a perfect manner if the bowl is accurately adjusted to the difference in densities of oil and water. The gravity disc with proper inner diameter i.e. with the diameter that corresponds to the difference in densities of the oil-water mixture to be treated should, therefore, be inserted in the bowl, This disc can be chosen from the set of disc provided with the separator. The inner diameter of the disc to be chosen can be determined by:  Calculation   Experiment The general rule is : Small diameter gravity disc when treating heavy oil Large diameter regulating ring when treating light oil Determining the size of gravity disc by calculation: For a given separating temperature, the inner diameter of the gravity disc and if the desired density of the oil can be determined from the diagram, provided that the density of the oil at a temperature ranging 15℃ and 90℃ is known. For example; Given: Density of oil at 20℃            ρ oil
7 comments
Read more