Skip to main content

Load Line & Why it is Important

Merchant ships have a marking on their hull know as the Plimsoll line or the Plimsoll mark, which indicates the limit until which ships can be loaded with enough cargo, internationally, the Plimsoll line on a ship is officially referred to as the international load line. Every type of ship has a different level of floating and the Plimsoll line on a ship generally varies from one vessel to another. 

All vessels of 24 meters and more are required to have this Load line marking at the centre position of the length of summer load water line.

There are two types of Load line markings:-
  1. Standard Load Line marking – This is applicable to all types of vessels.
  2. Timber Load Line Markings – This is applicable to vessels carrying timber cargo.
These marks shall be punched on the surface of the hull making it visible even if the ship side paint fades out. The marks shall again be painted with white or yellow colour on a dark background/black on a light background. 



The complete Load line markings consist of 3 vital parts: 
  1. Deck Line – It is a horizontal line measuring 300mm by 25mm. It passes through the upper surface of the freeboard.
  2. Load Line Disc-It is 300mm diameter and 25mm thick round shaped disc. It is intersected by a horizontal line. The upper edge of the horizontal line marks the ‘Summer saltwater line’ also known as ‘Plimsol Line’.
  3. Load Lines – Load lines are horizontal lines extending forward and aft from a vertical line placed at a distance of 540mm from the centre of the disc. They measure 230mm by 23mm. The upper surfaces of the load lines indicate the maximum depths to which the ships maybe submerged in different seasons and circumstances.

S – Summer:- It is the basic freeboard line at the same level as the Plimsol Line. Other load lines are marked based on this Summer freeboard line.
T – Tropical:- It is 1/48th of summer draft marked above the Summer load line.
W – Winter:- It is 1/48th of summer draft marked below the Summer load line.
WNA – Winter North Atlantic:- It is marked 50mm below the Winter load line. It applies to voyages in North Atlantic ( above 36 degrees of latitude) during winter months.
F – Fresh Water:- It is the summer fresh water load line. The distance between S and F is the Fresh Water Allowance (FWA).
TF – Tropical Fresh Water:- It is the fresh water load line in Tropical. It is marked above the T at an amount equal to FWA.



Certification:
Every ship that has been surveyed and marked in accordance with the present Load line convention are issued by the authorized administrator, an International Load Line Certificate. The certificate will have a validity of not more than 5 years and will contain all vital information that includes the assigned freeboard and fresh water allowance.
It is to be noted that, after completion of a load line survey and issuance of the certificate; no changes shall be made to the superstructure, markings, equipment or arrangements that have been covered under the survey. If such changes need to be made, the authorized authority conducting the survey shall be contacted.

The fundamental purpose of a Load Line is to allow a maximum legal limit upto which a ship can be loaded. By prescribing such limits, the risk of having the vessel sailing with inadequate freeboard and buoyancy can be limited. A vessel should be having sufficient freeboard at all times, any exceptions made will result in insufficient stability and excessive stress on the ship’s hull. This is where load lines play an important role, as it makes the task of detecting whether the vessel is overloaded and it’s freeboard tremendously easy and effortless.
However, since the buoyancy and immersion of the vessel largely depend on the type of water and it’s density, it is not practical to define a standard freeboard limit for the ship at all times. For this reason, the convention has put regulations which divides the world into different geographical zones each having different prescribed load line.
For example, A vessel sailing in Winter on North Atlantic Ocean will have a greater freeboard than on a voyage in Tropical Zones and Freshwaters.

Technically, no ship is able to absolutely float above, as it travels across the waters. A certain portion of the ship is always immersed in the sea water and the level of submerging decided by the gross weight of the respective ship. Even the type of water in which the ship is floating influences the application of the load line. Sometimes even the oceanic regions and changing seasons affect the Plimsoll mark, as well. Researchers have found out that the temperature and salinity of the water also plays a key role in deciding the height until which the ship can be loaded.


Importance of Load Line Ship:
They indicate the density of seawater, which determines how much lift force the water can apply to the ship. So, basically, the lines show how much cargo a ship can hold in different water bodies.



_________________________________________________________________________________


Extra Info:

Timber Load Line Markings
Ships engaged in the timber deck cargo trade are required to have a special set of Load lines known as the Timber Loadlines. Such vessels shall comply with the Code of Safe Practices for Ships Carrying Timber Deck Cargo in construction and other requirements obtaining greater reserve buoyancy and lesser summer freeboard.
Timber cargo vessels will have a second set of Load Lines marked similar to the standard load lines positioned 540mm abaft the centre loadline disc.
The letter marking of the timber loadline are different and are prefixed by ‘L’ meaning ‘Lumber’.
LS – Lumber Summer:- Its upper edge marks the summer saltwater timber loadline. It is situated at a specified level above the Plimsol line.
LW – Lumber Winter:- It is 1/36th of the lumber summer draft below LS.
LT – Lumber Tropical:- It is 1/48th of the lumber summer draft above LS.
LWNA – Lumber Winter North Atlantic:- It is at the same level as WNA.
LF – Lumber Freshwater:- It is situated above the LS by an amount equal FWA.
LTF – Lumber Tropical Fresh Water:- It is positioned above LT by an amount equal to FWA.


Comments

  1. Good article and the most important post for me. I am very happy to see your standard post. line marking services Sydney.

    ReplyDelete
  2. Plumbing is as important to your residential or commercial building as oxygen is to the body. Plumbing services ensure that water comes in and out of your house properly. A faulty pipe or leakage means excess moisture inside the house which can cause mold and fungus to grow. iPlumber Pro

    ReplyDelete
  3. This is really a good source of information, I will often follow it to know more information and expand my knowledge, I think everyone should know it, thanks Best line marking central coast service provider

    ReplyDelete
  4. Your blog contains lots of valuable data. It is a factual and beneficial article for us.Warehouse Line Marking Thankful to you for sharing an article like this.

    ReplyDelete
  5. Nice blog!!!
    If you are thinking to relocate your household goods from one place to another.

    Best shipping company in Dubai

    ReplyDelete
  6. I really enjoyed this blog and thank you for sharing this informative information about Dangerous Cargo Handling in your blog. You can get vital information on Dangerous Cargo Handling through DGM Florida; please visit our website for more information.

    ReplyDelete
  7. When you go camping with camping chairs or trekking, every step you take and every breath you take is a reason to rejoice. Because of this, we are reminded to treat the planet with care and to value the unique opportunities that only nature can provide.

    ReplyDelete
  8. Sleeping bags, like cozy cocoons, envelop tired explorers, cradling them in comfort amidst the wilderness, where dreams beneath the starry sky are the most vivid of all.




    ReplyDelete

Post a Comment

Popular posts from this blog

Difference Between A, B & C-Class Divisions?

IMO Symbol A Class Division  IMO Symbol B Class Division  SOLAS has tables for structural fire protection requirement of bulkheads and decks. The requirements depend on the spaces in question and are different for passenger ships and cargo ships. The Administration has required a test of a prototype bulkhead or deck in accordance with the Fire Test Procedures Code to ensure that it meets the above requirements for integrity and temperature rise. Types of Divisions: "A" Class "B" Class "C" Class "A" Class: "A" class divisions are those divisions formed by bulkheads and decks which comply with the following criteria: They are constructed of steel or equivalent material They are suitably stiffened They are constructed as to be capable of preventing the passage of smoke and flame to the end of the one-hour standard fire test. they are insulated with approved non-combustible materials such that the average tempera

Gravity Disc

Oils containing water can only be de-watered in a perfect manner if the bowl is accurately adjusted to the difference in densities of oil and water. The gravity disc with proper inner diameter i.e. with the diameter that corresponds to the difference in densities of the oil-water mixture to be treated should, therefore, be inserted in the bowl, This disc can be chosen from the set of disc provided with the separator. The inner diameter of the disc to be chosen can be determined by:  Calculation   Experiment The general rule is : Small diameter gravity disc when treating heavy oil Large diameter regulating ring when treating light oil Determining the size of gravity disc by calculation: For a given separating temperature, the inner diameter of the gravity disc and if the desired density of the oil can be determined from the diagram, provided that the density of the oil at a temperature ranging 15℃ and 90℃ is known. For example; Given: Density of oil at 20℃            ρ oil